THE LAB

Custom Work showcase

Bigsby B5 With Vibramate Kit

Installed a Bigsby on a Telecaster without any drilling or permanent modifications to the guitar. Can be changed back to the original set-up at any time! See more of this project in The Lab.

Refret On A 1961 Jazzmaster

Refret on a 1961 Jazzmaster, Modded with 6105 frets and 9" radius for that deep blues bending. This thing is gonna play fantastic! See more of this project in The Lab.

1935 Cromwell (Gibson) Makeover

Did a vintage sunburst relic re-finish. All of the parts for this guitar were missing, so I had to re-fret, add new tuning keys, bridge, and tailpiece. See more of this project in The Lab.

Floyd Rose Upgrades

ModMan Guitar is now an Authorized Floyd Upgrades Install Center! Installed a 37mm Copper Sustain Big Block, Heavy Duty Noiseless Springs & Titanium String Blocks in this original Custom Modman Guitar. This thing Screams Now! See more of this project in The Lab.

Fender Jaguar Blacktop Conversion

Converted this Jag from a 6 string to a 4 string tenor guitar. See more of this project in The Lab.

Repaired Broken Headstock

The dreaded broken headstock! Never fear, the Modman can fix! Customer opted to leave the battle scars and not re-finish his Gibson Les Paul. See more of this project in The Lab.

Fender Todd Krause Custom Shop

Made a custom one piece pick guard and re-wired guitar. See more of this project in The Lab.

Modded Electar 30

Added a stand-by switch. Replaced 10" speaker with custom baffle/custom grill cloth and a 12" Celestion Vintage 30 speaker. See more of this project in The Lab.

Fender refinish

Before, during & after pics of Fender Lead ll Refinish in Fire Red Nitro lacquer

Modman Guitar Build

This customer is a big fan on the 80’s shred guitar era: He requested a sleek S Style guitar with a single hum bucker and a Floyd Locking Tremolo. I also added Floyd Upgrades Titanium String Blocks and a Big Copper Sustain Block. The result was stunning!

Custom Modman Pedal Board

Custom built pedal board with heavy duty road case.

Pedal Board Rebuild

This project called for a complete rebuild of a customers pedalboard: 1: Made custom thick clear top with an LED lighting system underneath, 2: All connector cables were made in house using Switchcraft plugs and Mogami cable 3: Attached all pedals with clear dual lock 4: installed CAE power supply to run everything with clean, quiet power